Laboratorijska oprema

MPC-102S

Model: MPC-102S
Test Standards: PP: ASTM D6749, ASTM D97, ISO 3016; CP: ASTM D7683, ASTM D2500, ISO 3015
Specimen Volume: 4.5ml
Measurement Modes: Selectable from various modes. 1.CP mode (0.1 or 1.0 °C intervals) 2.PP mode: Programmed by the user. Programmable parameters are: *Amount of applied air pressure for PP detection, to accommodate different sample types: L(low) for diesel fuels, H(high) for lube oils, VH(very high) and UH (ultra high) for residual fuels and similar samples. *Testing intervals: 1.0°C, 2.5°C, or 3.0°C (In total, 4x3=12 modes for PP.) 3.CP/PP modes: CP is determined and then PP. PP detection is programmable by the user with the same parameters as PP modes.
Measuring Range: -65°C to +51°C
Sample Automatic Pre-Heating: Automatic preheating at either +45°C or EPP+10°C. (EPP=Expected Pour Point)
Display: Big digital display on VFD for showing real time parameters (sample temperature, bath temperature, test results).
EPP Setting: EPP (Expected Pour Point) needs to be set prior to test starts.
Specimen Cup: Cylindrical glass test jar with 4.5ml sample volume with reflex seal on the bottom for cloud point test.
Sensors: Compound type sensor assembly for PP and CP. PP detected by air pressure method (patented). CP detected photo-electrically. PT100 temp. sensors.
Sample Cooling Rate: As standard, 4°C/min. till EPP+40°C, and 1°C/min. Thereafter cooling profile is programmable.
Safety Shutdown: As hot side of TED reaches 60°C while preheating, warning buzzer beeps and heating stops.
Data Output: RS-232C 1 channel (for PC or Optional Printer)
Power Supply: 100VAC to 240VAC 50/60Hz
Power Consumption: 80 Wh for 1 test (about 1 hour), 30g CO2 (@0,378 Kg CO2 / 1000 Wh)
Operating Ambiental Temperature: 10 to 35°C
Size (W x D x H): 300 x 460 x 320 (mm)
Weight: 11 Kg

Bath Model: CB-80C
Bath Temperature Range: -70°C to +80°C
Bath Temperature Control: PID control with 2 points of revision functions
Bath Size (W x D x H): 222 x 407 x 238 (mm)
Bath Weight: 13 Kg

IQ/OQ/PQ Qualification: Yes, possible

Detaljni Pregled

MPC-102L

Model: MPC-102L
Type:: Mini Pour Point(PP) and Cloud Point(CP) tester with sequential CP and PP measuring capability. Sample cooling and pre-heating by TED.
Test Standards: ASTM D6749/D97, ISO 3016 (PP), ASTM D7683/D2500, ISO 3015 (CP)
Specimen Volume: 4.5ml
Cooling: Liquid Cooling
Measuring Range: -40°C to +51°C with tap water of 20°C; -65°C to +51°C with cooling liquid of -35°C (*:Sample viscosity, etc. affects on lowest temperature of the measuring range.)
Measurement Modes: Selectable from various modes. 1.CP mode (0.1 or 1.0 °C, selectable) 2.PP modes: Programmed by the user. Programmable parameters are: *Amount of applied air pressure for PP detection, to accommodate different sample types: L(low) for diesel fuels, H(high) for lube oils, VH(very high) and UH (ultra high) for residual fuels and similar samples. *Testing intervals: 1.0°C, 2.5°C, or 3.0°C (In total, 4x3=12 modes for PP.) 3.CP/PP modes: CP is determined and then PP. PP detection is programmable by the user with the same parameters as PP modes'. (12 modes in total.)
Sample Automatic Pre-Heating: Automatic preheating at either +45°C or EPP+10°C. (EPP=Expected Pour Point)
Display: Test parameters, EPP, bath temperature, sample temperature, PP, and CP displayed on VFD. Temperatures displayed in 0.1°C increments.
EPP Setting: EPP (Expected Pour Point) needs to be set prior to test starts.
Specimen Cup: Cylindrical glass test jar with 4.5ml sample volume.
Sensors: Compound type sensor assembly for PP and CP. PP detected by air pressure method (patented). CP detected photo-electrically. Pt100 temperature sensors.
Sample Cooling Rate: As standard, 4°C/min. till EPP+40°C, and 1°C/min. Thereafter, cooling profile is programmable.
Safety Shutdown: As hot side of TED reaches 60°C while preheating, warning buzzer beeps and heating stops.
Data Output: RS-232C 1 channel (for PC or Optional Printer)
Data Strage: Last 50 test data are stored in RAM
Power Requirements: 100, 120, 220, or 240VAC 0.5kW
Dimensions (WxDxH) (mm) and Weight: 230mm x 480 x 385, 20kg

IQ/OQ/PQ Qualification: Yes, possible

Detaljni Pregled

ACO-8AS

Model: ACO-8
Tip: Automatski instrument, mikroprocesorski kontrolisan
Standardi: ISO 2592, ASTM D92, IP36
Merni opseg: Od ambijentalne temperature do 400°C
Metode merenja: ISO CRM, ISO Normal, ISO SPE, ISO Flash & Fire, ISO Skim*, ASTM Normal, ASTM SPE, ASTM Flash & Fire, ASTM Skim*, Meoda koju kreira korisnik (*: metodu radi samo model ACO-8AS)
Grejač: Legura nikla, hroma i gvožđa: 800W@100V ili 800W@220V
Hladnjak: Vazdušno forsirano hlađenje, "Sirocco" ventilator
Displej: 5.7 inča (117 x 88mm) kolor LCD displej sa LED pozadinskim osvetljenjem
Mehanizam za skidanje (samo verzija za asfalt): Teflonski noš rotira kako bi sa uzorka skinuo površinski film. Podešavaju se temperatura i vremenski interval u kome se skida film. Kada se ne koristi, može se skinuti
Temperaturni senzor: PT-100 u oklopu od nerđajućeg čelika
Detektor paljenja: Dupli jonizirajući prsten
IQ/OQ/PQ kvalifikacije: Da, moguća
Korekcija i kompenzacija rezultata: Automatska korekcija ugrađenim senzorom za pritisak.
Ulazno-izlazni priključci: 1kom RS-232C (za PC ili opcioni printer), 1kom USB (za USB tastaturu ili USB Fleš memoriju)
Sigurnosni mehanizmi: Automatsko gašenje pali alarm i indikaciju na displeju kada: (a) se postigne EFP+30°C ili temperatura od 400°C, (b) sistem detektuje neispravni termometar, (c) sistem detektuje neispravan detektor plamena, (d) sistem detektuje neispravan termalni osigurač (u tom trenutku se uključuje i poklopac koji zatvara posudu u kojoj nastane požar), (e) sistem detektuje praznu unutrašnju bateriju, (f) pokretni delovi nisu na početnoj poziciji, (g) sistem detektuje da ne radi kontrolni računar (ne radi displej)
Dovod gasa: LPG ili neutralni gas (Max. pritisak:10kPa)
Napajanje: 100/120VAC ili 220/240 VAC, 50/60Hz
Snaga: 1000W MAX.
Potrošnja: 160Wh za 1 test (oko 20 min), 60.48g CO₂ (@ 0.378kgCO₂/1kWh)
Opseg ambijentalne temperature: 10°C do 35°C
Dimenzije i težina: 230mm (D) x 470mm (Š) x 390mm (V) 16kg

IQ/OQ/PQ kvalifikacije: Da, moguća

Detaljni Pregled

A670

Merni opseg indeksa prelamanja (nD): 1.30000 - 1.70000
Vrednost greške merenja (nD): ±0.0001
Rezolucija merenja (nD): 0.0001/0.00001
Merni opseg (Brix): 0 - 100%
Vrednost greške merenja (Brix): ±0.1%
Rezolucija merenja (Brix): 0.1%/0.01%
Kontrola temperature: ugrađeni poluprovodnički elementi
Opseg merenja temperature: 10 - 85°C
Opseg kontrolisane temperature: 5 - 70°C
Preciznost kontrole temperature: ±0.05°C
Intefejs: RS232/USB/SD kartica/U disk/Internet
Broj memorijskih mesta za čuvanje podataka: 4GB
Diplej: 7 inča, TFT ekran osetljiv na dodir
Napajanje: 110V do 240V (12V,10A)
Snaga: 45W
Neto masa: 12kg
Dimenzije: 365mm x 300mm x 150mm

Detaljni Pregled

Laboratorijska oprema

MPC-102S

MPC-102L

ACO-8AS

A670

Technical buffer pH 4.01, 6 x 250mL

Technical buffer pH 4.01, 250mL

Technical buffer pH 2.00, 6 x 250mL

Technical buffer pH 2.00, 250mL

Technical buffer pH 11.00, 6 x 250mL

Technical buffer pH 11.00, 250mL