Proizvodi

Model: ATG-8W
Test Methods: ASTM D56, IP 304, JIS K2265-1
Measuring Range: ambient to +95°C
Ignition source: Gas flame or Electric Coil
Temperature Sensor: PT-100 in stainless steel sheath
Flash Detector: CRC Thermocouple
Operating Environment: 10°C to 35°C
Power consumption: 500W
Size: 230(W) x 470(D) x 385(H) mm
Net Weight: 17kg

IQ/OQ/PQ qualification: Yes, possible

Model: ACO-8
Tip: Automatski instrument, mikroprocesorski kontrolisan
Standardi: ISO 2592, ASTM D92, IP36
Merni opseg: Od ambijentalne temperature do 400°C
Metode merenja: ISO CRM, ISO Normal, ISO SPE, ISO Flash & Fire, ISO Skim*, ASTM Normal, ASTM SPE, ASTM Flash & Fire, ASTM Skim*, Meoda koju kreira korisnik (*: metodu radi samo model ACO-8AS)
Grejač: Legura nikla, hroma i gvožđa: 800W@100V ili 800W@220V
Hladnjak: Vazdušno forsirano hlađenje, "Sirocco" ventilator
Displej: 5.7 inča (117 x 88mm) kolor LCD displej sa LED pozadinskim osvetljenjem
Mehanizam za skidanje (samo verzija za asfalt): Teflonski noš rotira kako bi sa uzorka skinuo površinski film. Podešavaju se temperatura i vremenski interval u kome se skida film. Kada se ne koristi, može se skinuti
Temperaturni senzor: PT-100 u oklopu od nerđajućeg čelika
Detektor paljenja: Dupli jonizirajući prsten
IQ/OQ/PQ kvalifikacije: Da, moguća
Korekcija i kompenzacija rezultata: Automatska korekcija ugrađenim senzorom za pritisak.
Ulazno-izlazni priključci: 1kom RS-232C (za PC ili opcioni printer), 1kom USB (za USB tastaturu ili USB Fleš memoriju)
Sigurnosni mehanizmi: Automatsko gašenje pali alarm i indikaciju na displeju kada: (a) se postigne EFP+30°C ili temperatura od 400°C, (b) sistem detektuje neispravni termometar, (c) sistem detektuje neispravan detektor plamena, (d) sistem detektuje neispravan termalni osigurač (u tom trenutku se uključuje i poklopac koji zatvara posudu u kojoj nastane požar), (e) sistem detektuje praznu unutrašnju bateriju, (f) pokretni delovi nisu na početnoj poziciji, (g) sistem detektuje da ne radi kontrolni računar (ne radi displej)
Dovod gasa: LPG ili neutralni gas (Max. pritisak:10kPa)
Napajanje: 100/120VAC ili 220/240 VAC, 50/60Hz
Snaga: 1000W MAX.
Potrošnja: 160Wh za 1 test (oko 20 min), 60.48g CO₂ (@ 0.378kgCO₂/1kWh)
Opseg ambijentalne temperature: 10°C do 35°C
Dimenzije i težina: 230mm (D) x 470mm (Š) x 390mm (V) 16kg

IQ/OQ/PQ kvalifikacije: Da, moguća

Model: ACO-8
Tip: Automatski instrument, mikroprocesorski kontrolisan
Standardi: ISO 2592, ASTM D92, IP36
Merni opseg: Od ambijentalne temperature do 400°C
Metode merenja: ISO CRM, ISO Normal, ISO SPE, ISO Flash & Fire, ISO Skim*, ASTM Normal, ASTM SPE, ASTM Flash & Fire, ASTM Skim*, Meoda koju kreira korisnik (*: metodu radi samo model ACO-8AS)
Grejač: Legura nikla, hroma i gvožđa: 800W@100V ili 800W@220V
Hladnjak: Vazdušno forsirano hlađenje, "Sirocco" ventilator
Displej: 5.7 inča (117 x 88mm) kolor LCD displej sa LED pozadinskim osvetljenjem
Mehanizam za skidanje (samo verzija za asfalt): Teflonski noš rotira kako bi sa uzorka skinuo površinski film. Podešavaju se temperatura i vremenski interval u kome se skida film. Kada se ne koristi, može se skinuti
Temperaturni senzor: PT-100 u oklopu od nerđajućeg čelika
Detektor paljenja: Dupli jonizirajući prsten
IQ/OQ/PQ kvalifikacije: Da, moguća
Korekcija i kompenzacija rezultata: Automatska korekcija ugrađenim senzorom za pritisak.
Ulazno-izlazni priključci: 1kom RS-232C (za PC ili opcioni printer), 1kom USB (za USB tastaturu ili USB Fleš memoriju)
Sigurnosni mehanizmi: Automatsko gašenje pali alarm i indikaciju na displeju kada: (a) se postigne EFP+30°C ili temperatura od 400°C, (b) sistem detektuje neispravni termometar, (c) sistem detektuje neispravan detektor plamena, (d) sistem detektuje neispravan termalni osigurač (u tom trenutku se uključuje i poklopac koji zatvara posudu u kojoj nastane požar), (e) sistem detektuje praznu unutrašnju bateriju, (f) pokretni delovi nisu na početnoj poziciji, (g) sistem detektuje da ne radi kontrolni računar (ne radi displej)
Dovod gasa: LPG ili neutralni gas (Max. pritisak:10kPa)
Napajanje: 100/120VAC ili 220/240 VAC, 50/60Hz
Snaga: 1000W MAX.
Potrošnja: 160Wh za 1 test (oko 20 min), 60.48g CO₂ (@ 0.378kgCO₂/1kWh)
Opseg ambijentalne temperature: 10°C do 35°C
Dimenzije i težina: 230mm (D) x 470mm (Š) x 390mm (V) 16kg

IQ/OQ/PQ kvalifikacije: Da, moguća

Model: ABL-8
Type: All -in one, microprocessor controlled
Test Standards: ISO 13736/ IP170, ISO 1516, ISO 1523
Measuring Range: +10°C to +110°C at room temperature of 10 to 30°C
Measurement Modes: ISO13736 Normal, ISO13736 SPE (search), ISO13736 Rapid, ISO1516, ISO1523, and User Custom
Bath: Metal Block
Sample Cooling/Heating: By Peltier Device
Display: 5.7 inch (117 x 88mm) color LCD with LED back light
Stirring: 0, 30 rpm (selectable)
Temperature Sensor: PT-100 in stainless steel sheath
Flash Detector: CRC Thermocouple
Ignition Source: Gas ignition with automatic lighting or electric ignition. Interchangeable
Barometric Correction: Automatic correction by built-in barometric pressure sensor
I/O Port: 1x RS-232C (for PC or Optional Printer); 1x USB channel (for USB keyboard or USB Flash Memory)
Safety Shutdown: Automatically shuts off and the problem is reported by buzzer and display, in case: (a) EFP+10 oC or 70 oC (ISO13736)110 oC(ISO1516,ISO1523) is reached, (b) temperature sensor is found defective, (c) flash detector is found defective, (d) thermofuse is blown, (e) electric Igniter is blown, (f) built-in battery is found drained out, (g) test cover is not set in place, (h)control computer runs away (no display)
Gas Supply: (When Gas Ignition is used), LP gas or natural gas (Max. pressure:10kPa)
Power Supply: 100/120VAC or 220/240 VAC, 50/60Hz
Power Consumption: 250VA MAX.
Electricity Consumption: 30Wh for 1 test (about 30 min), 11.34gCO2 (@ 0.378kgCO2/1kWh)
Ambient Temp. Range: 10°C to 35°C
Dimensions & Weight: 230mm (W) x 470mm (D) x 390mm (H) 16kg

IQ/OQ/PQ Qualification: Yes, possible

Model: ABL-8L
Type: All -in one, microprocessor controlled
Test Standards: ISO 13736/ IP170, ISO 1516, ISO 1524
Measuring Range: -30°C to +80°C at cooling medium of 10°C, 0°C to +110°C at cooling medium of 40°C
Measurement Modes: ISO13736 Normal, ISO13736 SPE (search), ISO13736 Rapid, ISO1516, ISO1523, and User Custom
Bath: Metal Block
Sample Cooling/Heating: By Peltier Device
Display: 5.7 inch (117 x 88mm) color LCD with LED back light
Stirring: 0, 30 rpm (selectable)
Temperature Sensor: PT-100 in stainless steel sheath
Flash Detector: CRC Thermocouple
Ignition Source: Gas ignition with automatic lighting or electric ignition. Interchangeable
Barometric Correction: Automatic correction by built-in barometric pressure sensor
I/O Port: 1x RS-232C (for PC or Optional Printer); 1x USB channel (for USB keyboard or USB Flash Memory)
Safety Shutdown: Automatically shuts off and the problem is reported by buzzer and display, in case: (a) EFP+10 oC or 70 oC (ISO13736)110 oC(ISO1516,ISO1523) is reached, (b) temperature sensor is found defective, (c) flash detector is found defective, (d) thermofuse is blown, (e) electric Igniter is blown, (f) built-in battery is found drained out, (g) test cover is not set in place, (h)control computer runs away (no display)
Gas Supply: (When Gas Ignition is used), LP gas or natural gas (Max. pressure:10kPa)
Power Supply: 100/120VAC or 220/240 VAC, 50/60Hz
Power Consumption: 250VA MAX.
Electricity Consumption: 30Wh for 1 test (about 30 min), 11.34gCO2 (@ 0.378kgCO2/1kWh)
Ambient Temp. Range: 10°C to 35°C
Dimensions & Weight: 230mm (W) x 470mm (D) x 390mm (H) 16kg

Requirements For Chiller Option For Abl-8L
Type: Circulator with heating/cooling capacities. Open bath type.
Temperature Range: 5°C to +40°C or wider
Pump Capacity: Pressure:0.2bar minimum; Flow rate:2L/min minimum
Cooling Capacity: 250W@10°C minimum
Heater Capacity: 500W minimum
Bath Volume: 3L minimum

IQ/OQ/PQ Qualification: Yes, possible

Model: RX-360SH
Type: Total sulfur analyzer for petroleum products by energy dispersive X-ray fluorescence method
Conforming Standards: ISO 8754, ASTM D4294-03, etc.
Number Of Test: One (1)
Sample Volume: 3 - 5ml
Measuring Range: 0-6,00wt%
Repeatability: *ASTM D4294 designates the repeatability in the range (r). In terms of standard deviation, 5ppm (check PDF brochure)
C/H Ratio Compensation: Automatic with 0.003wt% max of compensation error when a 1wt% sample is tested.
Measuring Time: 10-990sec with a 10sec increment. 1-99 times.
Calibration: Automatic two point calibration; Manual two point calibration; Automatic multiple-point calibration (up to 10 points); Manual multiple-point calibration (up to 10 points)
X-Ray Source: X-ray tube operated at 7kV-0.15mA
Sample Cup: 2-piece Teflon cup with disposable Mylar film
Printer: Built-in impact dot matrix printer (paper roll width 57mm)
Display: LCD (20 characters x 4 lines)
X-Ray Leakage: 0.6 micro Sv/Hr or less on instrument surface
Data Output: 1x RS-232C
Oparating Temperature/Humidity: 10-30°C with a temperature drift within 10°C in a day. rH to be within 80%.
Power Supply: DC12V (with the provided AC Adapter or optional 12VDC cord with lighter plug)
Safety: Interlock mechanism against accidental X-ray leakage
Dimensions/Weight: Test head: 420W x 350D x140H (mm)/11kg; AC Adapter: 50W x 115D x 25H (mm)/0.25kg

IQ/OQ/PQ Qualification: Yes, possible

Model: RX-630SA
Test Standard: JIS K 2541-4, ISO 8754, ASTM D4294-03, etc.
Sample: Kerosene, Naphtha, Gas oil, Crude oil, Base oil, etc.
Measuring Range: 0 to 6 wt %
Measuring Time: 10 to 990 sec, 1 to 99 times
Precision: LOD (Limit of Detection) = 15 mg/kg; LOQ (limit of quantitation) = 50mg/kg
Sample Changer: Carousel type 12 position (sample volume: approx. 3ml)
X Ray Source: Small air - cooled X-ray tube rated 7kv - 0,2mA
Sample Cell: Reusable 2 piece PTFE cup with disposable cell sheet
Automatic Calibration: 2 points, 3 points, M auto (max 12 points) calibration
Automatic Correction: C/H correction, Temperature correction, Barometric pressure correction
Number Of Calibration Curve: 3
Printer: Build-in dot matrix type, paper width: 57mm
Data Output: 1x RS-232C
Data Storage: Last 999 test results
Safety: Cut off X-ray tube supply by interlock system when X-ray is leaked
Ambiental Conditions: 10 to 30°C (with a temperature drift within 10°C in a day) Relative humidity: less than 80%
Size (W x D x H) (mm): 555 x 555 x 262
Weight (Kg): 27
Power Supply: AC100 to 240V, 200VA, 50/60Hz

IQ/OQ/PQ Qualification: Yes, possible

Model: PX224M
Kataloški broj: 30430013
Odobren model (kod Direkcije za mere i dragocene metale): Da, Klasa I
Verifikacioni interval (e) (g): 0,001
Kalibracija: Interna
Kapacitet (g): 220
Rezolucija (g): 0,0001
Ponovljivost (STDEV) (g): 0,0001
Linearnost (g): ±0,0002
Vreme stabilizacije (s): 4
Osetljivost temperaturnog odstupanja (PPM/K): ± 3
Tipična minimalna masa merenja prema USP (USP K=2, U=0,10%): 200 mg
Optimizovana minimalna masa merenja (USP, U=0,10%, K=2) SRP≤0,41d*: 82 mg
Jedinice merenja: g, mg, ct
Aplikacije: Osnovno merenje mase, Brojanje komada, Procentulano merenje, Merenje životinja, Određivanje gustine
Dimenzije merene ploče (Ø): 90 mm
Napajanje: Power Input: 100 - 240V ~ 200mA 50 - 60
Dimenzije vage (Š x D x V): 209 x 321 x 309 mm
Komunikacioni interfejsi: RS232 i USB
Opseg radne temperature: 10°C do 30°C
Neto težina: 4,5 kg
Težina transportnog pakovanja: 7 kg
Dimenzije transportnog pakovanja (Š x D x V): 507 x 387 x 531 mm

IQ/OQ/PQ Kvalifikacija: Da, moguća je

*: Vrednost SRP je standardna devijacija za n broj merenja (n≥10)

Model: PX323M
Kataloški broj: 30430015
Odobren model (kod Direkcije za mere i dragocene metale): Da, Klasa II
Verifikacioni interval (e) (g): 0,01
Kalibracija: Interna
Kapacitet (g): 320
Rezolucija (g): 0,001
Ponovljivost (STDEV) (g): 0,001
Linearnost (g): ± 0,002
Vreme stabilizacije (s): 2
Osetljivost temperaturnog odstupanja (PPM/K): ± 3
Tipična minimalna masa merenja prema USP (USP K=2, U=0,10%): 2 g
Optimizovana minimalna masa merenja (USP, U=0,10%, K=2) SRP≤0,41d*: 0,82 g
Jedinice merenja: g, mg, ct
Aplikacije: Osnovno merenje mase, Brojanje komada, Procentulano merenje, Merenje životinja, Određivanje gustine
Dimenzije merene ploče (Ø): 120 mm
Napajanje: Power Input: 100 - 240V ~ 200mA 50 - 60
Dimenzije vage (Š x D x V): 209 x 321 x 309 mm
Komunikacioni interfejsi: RS232 i USB
Opseg radne temperature: 10°C do 30°C
Neto težina: 4,5 kg
Težina transportnog pakovanja: 7 kg
Dimenzije transportnog pakovanja (Š x D x V): 507 x 387 x 531 mm

IQ/OQ/PQ Kvalifikacija: Da, moguća je

*: Vrednost SRP je standardna devijacija za n broj merenja (n≥10)

Model: PX523M
Kataloški broj: 30430017
Odobren model (kod Direkcije za mere i dragocene metale): Da, Klasa II
Verifikacioni interval (e) (g): 0,01
Kalibracija: Interna
Kapacitet (g): 520
Rezolucija (g): 0,001
Ponovljivost (STDEV) (g): 0,001
Linearnost (g): ± 0,002
Vreme stabilizacije (s): 2
Osetljivost temperaturnog odstupanja (PPM/K): ± 3
Tipična minimalna masa merenja prema USP (USP K=2, U=0,10%): 2 g
Optimizovana minimalna masa merenja (USP, U=0,10%, K=2) SRP≤0,41d*: 0,82 g
Jedinice merenja: g, mg, ct
Aplikacije: Osnovno merenje mase, Brojanje komada, Procentulano merenje, Merenje životinja, Određivanje gustine
Dimenzije merene ploče (Ø): 120 mm
Napajanje: Power Input: 100 - 240V ~ 200mA 50 - 60
Dimenzije vage (Š x D x V): 209 x 321 x 309 mm
Komunikacioni interfejsi: RS232 i USB
Opseg radne temperature: 10°C do 30°C
Neto težina: 4,5 kg
Težina transportnog pakovanja: 7 kg
Dimenzije transportnog pakovanja (Š x D x V): 507 x 387 x 531 mm

IQ/OQ/PQ Kvalifikacija: Da, moguća je

*: Vrednost SRP je standardna devijacija za n broj merenja (n≥10)